Displaying Pc Screen On Tv; Hdmi Functions - Panasonic Vieta TX-26LXD70A Operating Instructions Manual

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 32)
Select the external input
1
INPUT
ASPECT EXIT
OK
Select "PC"
2
MENU RETURN
Input Selection
AV1
OPTION DIRECT TV REC
AV2
AV3
AV4
1 2 3
PC
HDMI1
HDMI2
4 5 6
TV
7 8 9
0
VCR
■
To return to TV
■
PC menu setting (changed as desired)
•
To make settings "How to Use Menu Functions"
Menu Item
R-Gain Adjusts the white balance for red areas
G-Gain Adjusts the white balance for green areas
Advanced
B-Gain Adjusts the white balance for blue areas
PC
Settings
Gamma (2.0 / 2.2 / 2.5)
Reset PC
Press the OK button to reset to the default settings
Settings
Switches to a wide view
•
Input VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
Resolution XGA (1,024 × 768 pixels), WXGA (1,366 × 768 pixels)
•
Options change depending on signals
Clock Set to the minimum level if noise occurs
Adjusts horizontal position
H-pos
PC
Adjusts vertical position
Setup
V-pos
Eliminates fl icker and distortion
•
Clock Phase
Adjust after Clock adjustment
PC sync signal type (H & V / On G)
•
Sync H & V : Horizontal and Vertical sync from your PC (Most common sync format)
On G : Sync on Green sync from your PC
Reset PC
Press the OK button to reset to the default settings
Settings
•
Other items p. 20 and p. 21
28
access
select
•
Corresponding signals (p. 36)
•
If "H-freq." or "V-freq." is shown in red,
the signals may not be supported.
to (p. 18)
Adjustments / Confi gurations (options)
•
Set to the minimum level if noise occurs

HDMI Functions

HDMI (high-defi nition multimedia interface) allows you to enjoy high-defi nition digital images and high-
quality sound by connecting the TV and the equipment.
HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a set top box or a DVD
player, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
About connections, see "External Equipment" (p. 32).
Note
•
HDMI is the world's fi rst complete digital consumer AV interface complying with a non-compression standard.
•
Audio settings can be made on the "HDMI1 Input" menu screen. (p. 20)
•
Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
•
HDMI2 terminal is for digital audio signal only.
•
Use with a PC is not assumed.
•
If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9".
•
These HDMI connectors are "type A".
•
These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright
protection.
•
An equipment having no digital output terminal may be connected to the input terminal of either "Component",
"S-VIDEO", or "Video" to receive analogue signals.
•
The HDMI input terminal can be used with only the following image signals:
480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment.
•
For details of the applicable HDMI signals, see p. 36.
■
DVI connection
If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable (∗2).
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal
(HDMI1: use AUDIO IN terminals).
■
DVI Position Settings
If the picture position is not fi t to the screen during the DVI connection, adjust the position on "DVI Position
Settings" in Setup Menu. The settings are memorized for each HDMI terminals and input signals.
•
To make settings "How to Use Menu Functions"
Menu Item
Adjusts horizontal position
H-pos
Adjusts vertical position
DVI Position
Settings
V-pos
Reset
DVI Position Press the OK button to reset to the default settings
Settings
to (p. 18)
Adjustments
(∗1): The HDMI logo is displayed on HDMI-compliant equipment.
(∗2): Enquire at your local digital equipment retailer shop.
29