Panasonic DMC-fz7 Operating Instructions Manual page 101

• Connect the USB connection cable with
• Hold the USB connection cable at C
3 Press 4 to select [PictBridge
(PTP)] and then press [MENU/
SET].
• If you set [USB MODE] in the [SETUP]
• Do not use any other USB connection
cables except the supplied one.
• To print the age in [BABY1]/[BABY2]
(P64) in scene mode or the departure
date for [TRAVEL DATE] (P66), use the
software [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied) and print from the
PC. For information about this, refer to the
separate operating instructions for PC
connection.
• To find out more about PictBridge
compliant printers, contact your local
dealer.
Downloaded From camera-usermanual.com Panasonic Manuals
the [ ] mark facing the [1] mark on
the [DIGITAL] socket.
and insert straight in or take straight
out.
USB MODE
PLEASE SELECT
THE USB MODE
PC
PictBridge(PTP)
MENU
SELECT SET
menu to [PictBridge (PTP)] in advance,
it is not necessary to set this every time
you connect to a PC. (P23)
∫ Single picture
1 Press 3 to select
[SINGLE PICTURE] and then
press [MENU/SET].
PictBridge
SELECT
2 Press 2/1 to select the picture
and then press 4.
MENU
SET
PictBridge
PLEASE SELECT
THE PICTURE TO PRINT
SELECT
PRINT
• The message disappears in about
2 seconds.
3 Press 3 to select [PRINT START]
and then press [MENU/SET].
SINGLE PICTURE
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
CANCEL
• Press [MENU/SET] to cancel printing.
4 Disconnect the USB connection
cable after printing.
Connecting to other equipment
SINGLE PICTURE
DPOF PICTURE
MENU
SET
SET MENU
100 _ 0001
1/3
EXIT MENU
１秒
1 OFF
MENU
SET
MENU
SELECT EXIT
101
VQT0V63