Table of Contents
Advertisement
FAQs
Problem
TV takes so long to
turn on
The channel cannot
be changed
The channel cannot
be selected
The remote control
does not work
TV goes into
"Standby mode"
An error message
appears
44
Actions
•
Like your computer, the TV has to run a number of
diagnostic and software checks before it can display any
broadcast channels.
•
Is the TV in Teletext mode? (p. 16)
•
Is the channel locked? (p. 24)
•
Are the batteries installed correctly? (p. 6)
•
Has the TV been switched On?
•
The sleep function is activated.
•
The TV enters "Standby mode" about 30 min. after
broadcasting ends.
•
Follow the message's instructions.
•
If the problem persists, contact the authorized
Service Centre.
SD Card: On screen messages
Message
•
Is SD Card in?
Insert a SD card.
•
SD Card is locked
Unlock the SD card.
Please unlock to operate
•
This fi le is locked
Unlock the fi le in the card.
Please unlock to operate
•
This type of format is not
The TV does not support the format.
supported
(For the applicable formats and data, see p. 40.)
•
This type of card is not
A card not supported by the TV has been inserted.
supported
(For the supported cards, see p. 40.)
•
Broken fi le
The fi le is broken.
Cannot display image
•
Memory full
The card memory is full.
•
Not enough memory
The card does not have enough memory to operate.
•
Cannot read fi le
The fi le is not readable.
•
Unrecordable source
That channel cannot be recorded. (Recording is automatically
SD recording is stopped
stopped.)
•
Error
Re-insert the card. If the error persists, format the card. (p. 31)
Check card
•
Card recording in progress
That operation is not available during recording.
Please stop recording to operate
To continue the operation, stop recording.
(For example, changing channels while recording a TV
programme.)
•
Delete fi le?
Displayed when you press Red colour button to delete a
MPEG4 fi le. Press OK button to confi rm deleting.
•
No time data
Since the signal does not have the time information, the date is
Cannot store time info
recorded as 01/01/2000.
Cautions in handling SD Card :
•
Do not remove the card while the TV is accessing data ("blue" LED
On) (this can damage card or TV).
•
Do not touch the pins on the back of the card.
•
Do not subject the card to a high pressure or impact.
•
Insert the card in the correct direction (otherwise, card may be
damaged).
•
Electrical interference, static electricity, or erroneous operation may
damage the data or card.
•
Back up the recorded data at regular intervals in case of deteriorated
or damaged data or erratic operation of the TV. (Panasonic is not
liable for any deterioration or damage of recorded data.)
Meaning / Action
Blue LED
WARNING: As with an small object,
SD card can be swallowed by young
children. Do not allow children to
handle SD card. Please remove SD card
immediately after use.
45
Hide quick links:
Advertisement
Table of Contents
