Panasonic Viera TC-P42G25 Operating Instructions Manual page 10

Accessories/Optional Accessory
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Adjust the plasma panel to your
desired angle.
Note
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full
rotation range.
Do not place any objects or hands within the full rotation range.
Reference of connection
Antenna terminal
Firmly tighten by hand.
10
Attaching the pedestal to TV (continued)
Location
(View from above)
a
b
AC cord connection
To attach
Insert it firmly until the
tabs on both sides click
into place.
Pin terminals
red blue green
Match colors of plugs and terminals.
Insert firmly.
c
Center of the
c
rotation.
green
(Continued)
TC-P42G25
a: 12.9 " (327 mm)
b: 15.7 " (397 mm)
c: 15°
TC-P46G25
a: 10.4 " (263 mm)
b: 17.5 " (443 mm)
c: 10°
TC-P50G25
a: 11.0 " (277 mm)
b: 17.5 " (443 mm)
c: 10°
To remove
Keep pushing both
sides until they snap
and pull.
HDMI terminal
Insert firmly.