Displaying Pc Screen On Tv - Panasonic Viera TX-37LZ800A Operating Instructions Manual

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 36)
INPUT
OPTION SD CARD
EXIT
RETURN
■
To return to TV
■
PC menu setting (changed as desired)
•
To make settings "How to Use Menu Functions"
Menu Item
R-Gain
G-Gain
Advanced
B-Gain
PC
Settings
Gamma
Reset to
Default
Input
Resolution
Clock
H-pos
PC
Setup
V-pos
Clock Phase
Sync
Reset to
Default
•
Other items p. 20 and p. 21
Select the external input
1
Select "PC"
2
Input Selection
AV1
AV2
AV3
AV4
PC
HDMI1
HDMI2
HDMI3
TV
Adjustments / Confi gurations (options)
Adjusts the white balance for red areas
Adjusts the white balance for green areas
Adjusts the white balance for blue areas
(2.0 / 2.2 / 2.5)
Press the OK button to reset to the default settings
Switches to a wide view
•
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,366 × 768 pixels)
•
Options change depending on signals
Set to the minimum level if noise occurs
Adjusts horizontal position
Adjusts vertical position
Eliminates fl icker and distortion
•
Adjust after Clock adjustment
PC sync signal type (H & V / On G)
•
H & V : Horizontal and Vertical sync from your PC (Most common sync format)
On G : Sync on Green sync from your PC
Press the OK button to reset to the default settings
•
Corresponding signals (p. 42)
•
If "H-freq." or "V-freq." is shown in red,
the signals may not be supported.
to (p. 18)
•
Set to the minimum level if noise occurs
access
select
29