Connecting The Aerial Cable To The Rf In Terminal; Connecting The Plug To The Wall Outlet; How To Turn The Power On - Panasonic TX-32F500A Operating Instructions Manual

TX32F500A-2912_E Page 7 Saturday, July 16, 2005 12:23 PM
Before Operating This Set
I Connecting the Aerial Cable to the RF In Terminal
VHF Aerial
Mixer
75 Ohm Coaxial Cable
To obtain optimum quality picture and sound, an Aerial, the correct
cable (75 Ohm coaxial) and the correct terminating plug are required.
If a communal Aerial system is used, you may require the correct
connection cable and plug between the wall Aerial socket and your
television receiver.
Your local Television Service Centre or Dealer may be able to assist
you in obtaining the correct Aerial system for your particular area and
accessories required.
Any matters regarding Aerial installation, upgrading of existing
systems or accessories required, and the costs incurred, are the
responsibility of you, the Customer.
I Connecting the Plug to the Wall Outlet
I How to Turn the Power On
UHF Aerial
RF In Terminal
Note:
• The On/Off switch on this model does not full disconnect the TV
from the mains supply.
STR F -/ +/ TV/AV
Press the Power switch on Television to turn the set on. (See page 13)
STR F -/
7
S-VIDEO
Y Y
VIDEO
MONO MONO P B MONO P B MONO
L
AUDIO
P R P R
R
MONITOR AV1 COMPONENT COMPONENT AV5
OUT IN AV2 IN AV4 IN IN
Coaxial Aerial Plug
RF In
Terminal
75 Ohm Coaxial Cable
Coaxial
Aerial Plug