Table of Contents
Advertisement
Fitting remote control batteries
1
Pull and hold the hook, then
open the battery cover.
Do not use rechargeable (Ni-Cad) batteries.
They are different in shape and performance and may fail to ensure correct operation.
Battery cautions
The incorrect use of batteries can cause electrolyte leakage which will corrode the Remote Control or cause
the batteries to burst.
Observe the following precaution:
1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example:"Zinc Carbon" with "Alkaline").
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when remote control acts sporadically or stops operating the TV set.
How to use the LCD stand
Adjust the LCD panel to your desired angle.
The LCD panel can be adjusted the following direction:
5
Forward
15 Backward
30 Right
30 Left
(View from the top)
30
2
-
+
-
+
"R6 (AA)" size
Insert batteries - note correct
polarity ( + and -).
30
3
Replace the cover.
(View from the side)
5
Advertisement
Table of Contents
