Fitting Remote Control Batteries; How To Use The Lcd Stand - Panasonic TC-20LA2H Operating Instructions Manual

Lcd tv model no. tc-20la2h
Table of Contents

Advertisement

Fitting remote control batteries

1
Pull and hold the hook, then
open the battery cover.
Do not use rechargeable (Ni-Cad) batteries.
They are different in shape and performance and may fail to ensure correct operation.
Battery cautions
The incorrect use of batteries can cause electrolyte leakage which will corrode the Remote Control or cause
the batteries to burst.
Observe the following precaution:
1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example:"Zinc Carbon" with "Alkaline").
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when remote control acts sporadically or stops operating the TV set.

How to use the LCD stand

Adjust the LCD panel to your desired angle.
The LCD panel can be adjusted the following direction:
5
Forward
15 Backward
30 Right
30 Left
(View from the top)
30
How to hang the LCD TV on the wall
This LCD TV is for use only with the following optional accessory.
Wall-hanging bracket ........................................................ TY-WK22LR1W
Always be sure to ask a qualified technician to carry out set-up.
WARNING
• DO NOT use other optional accessories.
Use with any other type of optional accessories may cause instability which could result in the possibility of injury.
2
-
+
-
+
"R6 (AA)" size
Insert batteries - note correct
polarity ( + and -).
(View from the side)
30
3
Replace the cover.
5

Advertisement

Table of Contents
loading

Table of Contents