Advanced Settings - Panasonic TH-37PG9U Operating Instructions Manual

Item Effect
PICTURE
Less
BRIGHTNESS
Darker
COLOR
Less
TINT
Reddish Greenish
SHARPNESS
Less

ADVANCED SETTINGS

Item Effect
BLACK
EXTENSION
Less
INPUT
LEVEL
Less
W/B HIGH R
Less
W/B HIGH B
Less
W/B LOW R
Less
W/B LOW B
Less
GAMMA
Down
AGC
OFF
Notes:
• Carry out "W/B" adjustment as follows.
1. Adjust the white balance of the bright sections using the "W/B HIGH R" and "W/B HIGH B" settings.
2. Adjust the white balance of the dark sections using the "W/B LOW R" and "W/B LOW B" settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other's settings, so repeat each step in turn to make the adjustment.
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.
Helpful Hint ( /
On the remote control unit, while the "ADVANCED SETTINGS" menu is displayed, if either the N button is pressed at
any time or the ACTION ( ) button is pressed during "NORMALIZE", then all adjustment values are returned to the
factory settings.
Adjustments
Adjusts the proper picture contrast.
More
Adjusts for easier viewing of dark
pictures such as night scenes and
Brighter
black hair.
Adjusts color saturation.
More
Adjusts for natural flesh tones.
Adjusts picture sharpness.
More
Adjusts the dark shades of the image in gradation.
More
Adjustment of parts which are extremely bright and hard to see.
(This cannot be adjusted when the input signal is DVI.)
More
Adjusts the white balance for light red areas.
More
Adjusts the white balance for light blue areas.
More
Adjusts the white balance for dark red areas.
More
Adjusts the white balance for dark blue areas.
More
S CURVE
Up
Increases the brightness of dark signal automatically.
ON
Normalization)
NORMALIZE
PICTURE Adjustments
Notes:
• "COLOR" and "TINT" settings cannot be
adjusted for "RGB/PC" and "DVI" input
signal.
• You can change the level of each function
(PICTURE, BRIGHTNESS, COLOR, TINT,
SHARPNESS) for each PICTURE MENU.
• The setting details for STANDARD,
DYNAMIC and CINEMA respectively
are memorized separately for each input
terminal.
• The "TINT" setting can be adjusted
for NTSC signal only during "VIDEO
(S VIDEO)" input signal.
• In PICTURE, there is not a noticeable
change even when contrast is increased
with a bright picture or reduced with a dark
picture.
Details
2.0 2.2 2.5
23