Vivotek FD9371-HTV User Manual page 205

width
<Not recommended to use
this>
height
<Not recommended to use
this>
Group: motion_c<0~(n-1)>_profile_i<0~(m-1)> for m profile and n channel product,
n denotes the value of "capability_nvideoin", m denotes the vaule of " capability_nmotionprofile ",
(capability_nmotionprofile > 0)
NAME
enable
policy
begintime
endtime
win_sensitivity
0 ~ 320 4/4
0 ~ 240 4/4
VALUE SECURITY
(get/set)
<boolean> 4/4
night, 4/4
schedule
hh:mm 4/4
hh:mm 4/4
0 ~ 100 4/4
version number (httpversion) is equal or
greater than 0400a.
Width of motion detection window.
* Only available when
"capability_motion_wintype" = rectangle.
* Only available when qvga is listed in
"capability_motion_windomain".
* It's recommended to use polygonsd
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.
Height of motion detection window.
* Only available when
"capability_motion_wintype" = rectangle.
* Only available when qvga is listed in
"capability_motion_windomain".
* It's recommended to use polygonsd
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.
DESCRIPTION
Enable profile 1 ~ (m-1).
The mode which the profile is applied to.
* Not support "policy=day" anymore when the
version number (httpversion) is equal or
greater than 0301a.
Begin time of schedule mode.
End time of schedule mode.
Sensitivity of all motion detection windows.
VIVOTEK
User's Manual - 205