Sony DSC-RX100M4 How To Use Manual page 100

Help Guide
Hint
In [Spd Priority Cont.] mode, the focus is determined when you press the shutter button
halfway down for the first image, and locked for subsequent shots. However, the camera
can continue adjusting the exposure for subsequent shots. To keep adjusting the
exposure throughout the continuous shooting, set the settings as follows:
Set [
[84] How to Use
shooting/Self-timer)
Self-timer
Shoots an image using the self-timer after a designated number of seconds have elapsed
since the shutter button was pressed.
1. MENU →
2. Select the desired mode using the right/left side of the control wheel.
Menu item details
Self-timer: 10 Sec:
Sets the 10-second delay self-timer.
When you press the shutter button, the self-timer lamp flashes, a beep sounds, and the
shutter operates after 10 seconds. To cancel the self-timer, press the shutter button again.
Self-timer: 5 Sec:
Sets the 5-second delay self-timer.
When you press the shutter button, the self-timer lamp flashes, a beep sounds, and the
shutter operates after 5 seconds. To cancel the self-timer, press the shutter button again.
Self-timer: 2 Sec:
Sets the 2-second delay self-timer. This reduces the camera-shake caused by pressing the
shutter button.
Hint
Press the
the self-timer.
To use the self-timer in bracket mode, select bracket mode under drive mode, then select
MENU →
Note
The self-timer is unavailable in the following situations:
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4573718122.w/en/print.html[10/27/2015 5:43:01 PM]
AEL w/ shutter] to [Auto] or [Off].
Using shooting functions
(Camera Settings) → [Drive Mode] → [Self-timer].
/ button of the control wheel and select
(Camera Settings) → [Bracket Settings] → [Selftimer during Brkt].
Selecting a drive mode (Continuous
(Single Shooting) to cancel