D-Link DAP-2690 Quick Installation Manual page 5

To power the access point, you can use one of the following 3 methods:
Method 1 - Use if you have a PoE switch.
Method 2 - Use if you do not have a PoE switch and do
Method 3 - Use if you do not have a PoE switch and have
Method 1
1. Connect one end of your Ethernet cable into the LAN (PoE) port on
the DAP-2690.
2. Connect the other end into one port on a PoE switch.
D-Link DAP-2690 Quick Install Guide
not have a power outlet near the location of the
access point.
a power outlet near the location of the access
point.
5