D-Link DAP-2690 Quick Installation Manual page 11

Your Setup is Complete
When you have completed the steps in this Installation Guide and configured
your for your network, your network should look similar to this:
To setup and manage the DAP-2690 from a computer, use one of the
following methods:
1. Connect a straight through Ethernet cable between the access point
and your computer.
2. Connect the access point to a switch or router and use a computer
from a computer that is also connected to that switch or router.
* Maximum Wireless signal rate derived from IEEE 802.11n specifications. Actual data throughput will vary.
Network conditions and environmental factors, including volume of network traffic, building materials and
construction, and network overhead lower actual data throughput rate.
D-Link DAP-2690 Quick Install Guide
11