If you switch to Shooting mode or turn off the camera before performing the
operations in Step 3, images will not be protected.
Selecting a Range
Choose images.
Press the qr buttons or turn the 7 dial to
choose an image, then press the m
button.
will appear on the screen.
Press the m button again to deselect the
image.
will disappear.
To choose additional images, repeat the
above procedure.
Protect the image.
If you press the n button, a
confirmation screen will appear.
Press the qr buttons or turn the 7 dial to
choose [OK], then press the m button.
Choose [Select Range].
Follow Step 2 on p. 148 to choose [Select
Range], then press the m button.
Choose a starting image.
Press the m button.
Protecting Images
149