Extension Arm Kit - Motorola AP6562 Installation Manual

Installation Guide
The following ancillary hardware to assemble the mounting bracket sections is included in the kit:
Description
M6 serrated hex flanged screws
1/2 inch hex head nut
1/2 inch x 3/4 inch hex head bolt
A torque wrench or ratchet with a 10mm adapter, or an adjustable wrench, can be used to assemble the mounting
brackets. A finished assembly of the mounting bracket kit is shown below. Assembly during deployment may
differ to achieve the required angle and rotation.

2.3.2 Extension Arm Kit

When mounting an AP6562 on poles more than 3 inches in diameter, use the extension arm kit (KT-150173-01) to
provide a minimum standoff distance of twelve inches to avoid interference with the antennas. The extension arm
kit is only required for AP6562 external antenna models.
Quantity
8
2
2
11
: