Advertisement
With the 420EX attached to a Type-A camera set to <
0
>
(Full Auto) or
<P> (Program AE), flash photography will be fully automatic and as easy
as normal AE photography without flash. The camera sets the shutter
speed and aperture automatically to suit the lighting situation, whether it is
dark or daylight (fill flash). E-TTL autoflash thereby sets the flash exposure
automatically.
Set the camera to
<
0
>
(Full
Auto) or <
P
> (Program AE).
• Fully automatic flash photography
takes effect when any Basic Zone
mode is set with the camera.
• Set the high-speed sync switch to
<e>.
Focus the subject.
,:. . ,
~
The shutter speed and aperture
/""
settings are displayed in the
viewfinder and on the LCD panel.
• The sync speed is set automatically
anywhere from 1 /60 sec. to the
camera1s fastest sync (varies
depending on the camera). The
aperture is also set automatically.
(-7page 52)
Take the picture.
• Check that the <
~
> icon is lit in the
viewfinder, then take the picture.
• Immediately before the picture is
taken, a preflash is fired. The main
flash then follows. The subject
brightness metered with the preflash
is used to determine the optimum
output of the main flash.
18
Advertisement
