Advertisement
Mounting the Speedlite
Loosen the locking collar.
• Turn it as shown by the arrow.
Mount the 420EX onto the camera.
• Slide the 420EX's mounting foot all
the way into the hot shoe.
Tighten the locking collar.
~
Turn the locking collar as shown by
the arrow. The mounting foot's
locking pin extends into the hot
shoe's locking pin hole.
• To detach the 420EX, turn the
locking collar in the opposite direction
until it stops. (The locking pin retracts
into the mounting foot.) Then slide
out the 420EX from the hot shoe.
. . The hot shoe on the EOS 650,620,750, and 850 does not have a locking pin
hole. Although the 420EX can still be mounted on these cameras, be careful not
to have it slip off the hot shoe.
12
Advertisement
