Table of Contents
Advertisement
Toggling Between the REC Mode and PLAY Mode
In the REC mode, touch "
To enter the
PLAY mode
In the PLAY mode, touch "
To enter the
(Show Icons). On the screen image
REC mode
that appears, touch "
. To turn off power
On both the camera and the controller, hold down [
seconds.
• Turning off the camera will cause the controller to turn off automatically.
• The camera will emit a sound when the camera is turned off. The camera turns off
when the power down process is complete.
Configuring Basic Settings the First Time You Turn On the
Camera
The first time you turn on the camera, a screen appears for configuring the display
language, date, and time settings. Failure to set the date and time correctly will cause
the wrong date and time data to be recorded with images.
IMPORTANT!
• Camera models sold in certain geographic areas may not support display language
selection.
1.
Turn on the camera and controller (page 27).
• If this is the first time you are turning on power, a language selection screen will
appear. If the screen does not appear, check to make sure that the camera is
turned on.
2.
Flick (page 19) the controller screen upwards and downwards or touch
"
", "
" until you find the language you want, and then touch to
select it.
• If "
" (PLAY) is not displayed on
the screen, you can touching the
Review image (page 61), or switch
to the PLAY mode by touching
"
" (Show Icons) and then
touching "
" (PLAY).
" (PLAY).
"
"
" (REC).
] (Power) for about two
29
"
"
(Show Icons)
Screen after "
(Show Icons) is touched
" (PLAY) / "
" (REC)
Quick Start Basics
"
Advertisement
Table of Contents
