Adjusting Projector Features; Shutting Off The Picture Temporarily; Using Picture In Picture - Epson PowerLite Pro Cinema 4040 User Manual

Adjusting Projector Features

Follow the instructions in these sections to use your projector's feature adjustments.

Shutting Off the Picture Temporarily

Using Picture in Picture

Adjusting the Color Convergence (Panel Alignment)
Adjusting the Color Tone (Color Uniformity)
Projector Security Features
Saving Settings to Memory and Using Saved Settings
Saving the Lens Position and Using Saved Lens Positions
Shutting Off the Picture Temporarily
You can temporarily turn off the projected picture if you want to redirect your audience's attention during
a presentation. Any video action continues to run, however, so you cannot resume projection at the point
that you stopped it.
1. Press the Blank button on the remote control to temporarily stop projection.
2. To turn the picture back on, press the Blank button again.
Parent topic:
Using Picture in Picture
You can use Picture in Picture mode to view two image sources simultaneously.
Note: You can display only HDMI video sources when using Picture in Picture mode. You cannot use
Picture in Picture while projecting 3D or 4K images.
Note:
Adjusting Projector Features
74