Brother DCP-L5500D User Manual page 632

Level 1 Level 2
WLAN Set to Default -
(For wireless
network models)
WLAN Enable
Wi-Fi Direct Push Button
(For wireless
network models)
PIN Code
Manual
Group Owner
Device
Information
Status
Information
I/F Enable
NFC -
(Available only for
certain models)
E-mail Mail Address
Setup Server
Setup Mail TX
Web Connect Proxy Settings Proxy
Settings
Level 3 Level 4
-
- -
- -
- -
- -
- -
Device Name -
SSID -
IP Address -
Status -
Signal -
- -
- -
- -
SMTP Server
Port
Auth. for
SMTP
SSL/TLS
Verify
Cert.
Sender Subject -
Size Limit Size Limit
Maximum
Size(MB)
Notification -
-
Connection
Address -
Descriptions
Restore the wireless network
settings to the factory settings.
Turns the wireless interface on or
off.
Configure your Wi-Fi Direct network
settings using the one-button push
method.
Configure your Wi-Fi Direct network
settings using WPS with a PIN code.
Configure your Wi-Fi Direct network
settings manually.
Set your machine as the Group
Owner.
View your machine's device name.
View the Group Owner's SSID.
When the machine is not connected,
the LCD displays Not Connected.
View your machine's current IP
Address.
View the current Wi-Fi Direct
network status.
View the current Wi-Fi Direct
network signal strength.
When your machine acts as Group
Owner, the LCD always indicates a
strong signal.
Turn the Wi-Fi Direct connection on
or off.
Turn the NFC function on or off.
Enter the email address.
Enter the SMTP server name and
address.
Enter the port number.
Select the Security method for email
notification.
Send or receive an email via an
email server that requires secure
SSL/TLS communication.
Verify the SMTP Server Certificate
automatically.
View the subject.
Limit the size of email documents.
Send notification messages.
Change the Web connection
settings.
625