Fujitsu lifebook t726 Operating Manual page 46

Working with the notebook
Combination
C
Ctrl
+
Shift
44
Description
Switch between screen outputs
Switchbetweenscreenoutputs Fn+ F10
Use this key combination to select which screen(s) is/are used for
display if an external monitor is connected.
Screen output is possible:
• only on the notebook's LCD screen
• only on the external monitor
• both the LCD screen and the external monitor.
Press the key combination several times to switch through all
possible settings.
It is possible to display video on two screens simultaneously,
regardless of what type and number of external screens are
connected.
If you have connected two external monitors to the port replicator,
the following display outputs are possible:
• only on the notebook's LCD screen
just the external monitor (analogue)
•
• both the LCD screen of the notebook and the external monitor
(analogue)
You cannot switch output to both external monitors on the port
replicator via the key combination.
Cancel current operation
This key combination can be used to halt an operation instantly
without clearing the keyboard buffer.
Back tab
This key combination moves the cursor back to the previous tab
stop.
Backtab Shift+Tab
Fujitsu