KX-FP151/155(E)(077-079) 01.12.19 10:06 AM Page 78
Jams
5
Turn the "T" shaped gear (blue) in the
direction of the arrow.
Make sure that the ink film is
wrapped around the blue core
at least once.
Correct
Tight
Blue core
6
Close the back cover securely by pushing
down on the dotted area at both ends (
Close the front cover securely (
Document jams –
If the unit does not release the document during feeding, remove the jammed document as
follows:
1
Open the front cover by pulling up the centre
part.
Remove the jammed document carefully.
2
3
Close the front cover securely.
Note:
Do not pull out the jammed paper forcibly before
opening the front cover.
78
Incorrect
The ink film is not wrapped
around the blue core.
Slack
Reverse
$
).
sending!
"T" shaped gear
(blue)
Ink film
#
).
2
Front cover
Centre part
Front cover
Dotted
area
1
Back cover
Jammed document