If A Power Failure Occurs - Panasonic KX-FP151E Operating Instructions Manual

KX-FP151/155(E)(071-076) 01.12.19 10:05 AM Page 76
Operations
Copying (cont.)
The printing quality is poor.
Original
A BC
Some paper has instructions
recommending which side to print on. Try
turning the paper over.
You may have used paper with a cotton
and/or fibre content that is over 20%, such
as letterhead or resume paper.
Using an answering
machine (KX-FP151 only)
I cannot receive documents automatically.
Your greeting message on the answering
machine is too long. Shorten the message
(up to 10 seconds).
The answering machine rings too many
times. Set to 1 or 2 rings.
I cannot receive voice messages.
Check if the answering machine is turned
on and connected to the fax machine
properly (p. 42).
Set the number of rings on the answering
machine to 1 or 2.
If a power failure
The unit will not function.
The unit is not designed for making
emergency telephone calls when the power
fails. Alternative arrangements should be
made for access to emergency services.
Fax transmission and reception will be
interrupted.
76
Copy
(continued)
occurs!
(continued)
I pressed the remote access code to
access the answering machine remotely,
but the line was disconnected.
The code may include "#" which is used
for certain features provided by telephone
companies. Change the code on the
answering machine to another number
which does not include "#".
Callers complain that they cannot send a
document.
Your answering machine has run out of
recording tape. Rewind the tape to record
messages.
You set the answering machine to only
give a greeting message.
Answering device
(KX-FP155 only)
I cannot retrieve recorded messages from
a remote location.
Press the remote operation ID correctly
and firmly (p. 54).
Messages in the mailbox do not play back.
The mailbox password is wrong. Enter the
correct password.
— For mailbox 1 password, see feature
#51 on page 67.
— For mailbox 2 password, see feature
#52 on page 67.
The other party complains that they
cannot leave a voice message.
The memory is full. Erase unnecessary
messages (p. 52, 55, 58).
If the delayed transmission (feature #25 on
page 64) is programmed and the start time
is passed during a power failure,
transmission will be attempted soon after
power is restored.
If any fax documents are stored in the
memory, they will be lost. When power is
restored, a power down report will be
printed out stating which contents in the
memory have been erased.