Disassembly And Assembly Instructions; Disassembly Instructions - Panasonic BB-HCM511A Service Manual

BB-HCM511A/BB-HCM531A

8 Disassembly and Assembly Instructions

8.1.

Disassembly Instructions

MAC address label caution
When you replace the CPU board, you must also attach the new MAC address label (included with the replacement CPU
board). Attach the new MAC address label to the unit by placing over the old MAC address label. Make sure the old address
cannot be seen. Throw away the old CPU board. It cannot be reused.
(IF the MAC address of the old CPU board is already registered via DDNS and then used in a different camera, the camera can-
not be used with DDNS service.) Refer to How to Change MAC Address Label (P.43).
8.1.1. How To Remove CPU Board
1. Remove four Screws (A).
2. Remove Cabinet Cover.
3. Remove two Screws (B), four Cables and CPU Board.
46