5. Release the two tabs
of the internal speaker holder.
Figure 47. Removing the internal speaker
6. Insert the new internal speaker into the internal speaker holder until the new internal speaker snaps into
position and is secured by the two tabs.
Figure 48. Installing the internal speaker
7. Secure the cable of the new internal speaker in the retaining clip on the side of the internal speaker
holder as shown.
Figure 49. Securing the internal speaker cable
8. Connect the cable of the new internal speaker to the internal speaker connector on the system board.
See "Parts on the system board" on page 6.
1
that secures the internal speaker as shown, and then lift the internal speaker out
.
Chapter 7
Installing or replacing hardware
81