Installation Of A Usb Device - Hawking HMPS1A User Manual

4.4

Installation of a USB Device

Some USB devices, like printers or MFPs (multifunction printers), require you to install
manufacturer provided driver (usually included on the printer's CDROM).
A. Insert the device's CDROM into the CD drive and run the "install program".
B. Follow the instructions of the installation program to install driver.
C. When the installation program asks you to plug-in the USB device, run the "Hawking
Control Center" software.
D. In the Control Center software, select the HMPS1A that has the desired USB device
attached.
E. Click the desired USB device as the following figure.
Note: On Mac, the "Connect" button is denoted by
F. Click the "Connect" button. Then the message "Manually Connected by
your_computer_name" will be shown, as the following figure.
15