Power Supply; Inserting Batteries - Sony DWZ-M50 Operating Instructions Manual

Power Supply

This section describes the power supply for
each device.
For details on how to insert batteries, see "Inserting
Batteries" (page 14).
Handheld microphone (ZTX-
M01), body-pack transmitter
(ZTX-B01)
Power supplied by two LR6 (size AA)
batteries.
The following types of battery can be used.
• Alkaline dry cell batteries
• Rechargeable nickel-metal hydride
batteries
• Lithium batteries
Half-rack receiver (ZRX-HR50)
Power supplied by the supplied AC adapter.
Compact receiver (ZRX-C30)
Power can be supplied by the supplied AC
adapter, by a commercially available 9 V
DC power supply unit, or by a square 9 V
dry cell battery (6LR61).
Priority sequence for power
supplies
When multiple power supplies are made
available for use, they will be used in the
following order of priority.
A 12 V power input
B 9 V power input
C Square 9 V dry cell battery (6LR61)

Inserting Batteries

CAUTION
Danger of explosion if battery is incorrectly
replaced.
14 Power Supply
Replace only with the same or equivalent
type recommended by the manufacturer.
When you dispose of the battery, you must
obey the law in the relative area or country.
Notes
• Always use sets of the same type of
battery. Do not use batteries of different
types or remaining charges together as a
set.
• Replacing the batteries during operation
will result in high noise. Be sure to turn
off the unit before replacing the batteries.
Handheld microphone (ZTX-
M01)
1
Press and hold the POWER/MUTING
button to turn off the unit.
2
Turn the grip in the direction of the
arrow, and pull down the grip until the
battery compartment is shown.
3
Insert two new LR6 (size AA) batteries
while making sure the polarities are
correct.