Port Adapters And Service Adapters - Cisco 7200 VXR User Manual

Field-Replaceable Units
An MII LINK LED is not provided on this I/O controller because the LED is provided on external
Note
transceivers that are required for connecting to the MII receptacle on the I/O controller. See
"Installing a Cisco 7200 VXR Router,"
Ports" section on page 3-25
Input/Output Controller C7200-I/O-FE-MII LEDs
Figure 1-25
receptacle (C7200-I/O-FE-MII), and
see
Figure 1-25 C7200-I/O-FE-MII LEDs and CPU Reset Button
Table 1-27 C7200-I/O-FE-MII I/O Controller LEDs
LED
FE ENABLE Green
FE LINK

Port Adapters and Service Adapters

The port adapters and service adapters installed in the Cisco 7200 VXR routers are of the same type as
those installed on the second-generation Versatile Interface Processors (VIPs) in the Cisco 7500 series
routers, in Cisco 7000 series routers with the Cisco 7000 series Route Switch Processor (RSP7000) and
Cisco 7000 series Chassis Interface (RSP7000CI), in the Cisco AS5800 Universal Access Server, and in
the Cisco uBR7246 universal broadband router.
Cisco 7200 VXR Installation and Configuration Guide
1-44
for Fast Ethernet MII connection requirements.
shows the LEDs on the I/O controller with the Fast Ethernet port equipped with a single MII
Table 1-22 for LEDs common to all I/O controllers.
Color Function
Indicates that the Fast Ethernet port is initialized and enabled for operation
by the system. This LED comes on after the I/O controller has been enabled
and remains on during normal operation of the router.
Green Indicates that the Fast Ethernet port has established a valid link with the
network. This LED remains off during normal operation of the router
unless there is an incoming carrier signal.
the "Connecting to the I/O Controller Ethernet and Fast Ethernet
Table 1-27 lists the LEDs specific to this I/O controller model. Also
Chapter 1 Cisco 7200 VXR Product Overview
78-5469-04 B0
Chapter 3,