Placing The Projector In Standby - Sony LSPX-P1 Manual

To turn on
Press and hold the power button (a). The projector is turned on, and the power indicator (b) turns on
in white.
To turn off
Press and hold the power button (a). The projector is turned off, and the power indicator (b) turns off.
To place the projector in standby status, lightly press the power button (a).
Hint
The Wireless unit is turned on when plugged in.
When you tap the
Short Throw Projector Application," the projector is placed in standby mode. To turn the projector off,
press and hold the power button of the projector.
When the projector is turned off, it is also disconnected from the Bluetooth connection and access point
(wireless router).
[11] Preparing Turning the power on/off
Placing the projector in standby status
When you are not going to use the projector for a while, place it in standby status to dim the
projection screen.
Entering standby status
Enter standby status either from the projector or the smartphone.
(standby) button on the home screen of the special application "Portable Ultra