Tv System - Panasonic Diga DMR-EH57 Operating Instructions Manual

Changing the unit's settings
Refer to the control reference on page 60.
Auto-Setup Restart
You can restart auto channel setting if set up (➡ 19) fails for some
reason.
After performing steps 1–4 (➡ 65)
5
Press [3, 4] to select "Auto-Setup
Restart" and press [OK].
The confirmation screen appears.
6
Press [2, 1] to select "Yes" and
press [OK].
[For]Australia]and]N.Z.]
≥If the country setting menu appears on the television
Press [3, 4] to select the country and press [OK].
You can also use the following method to restart Auto-Setup.
When the unit is on and stopped,
Press and hold [X CH] and [CH W] on the main unit until the
country setting screen
All the settings except for the ratings level, ratings password and
clock settings return to the factory preset. The timer recording
programmes are also cancelled.
§
Only for Australia and N.Z.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [EXIT].
List of TV Reception Channels
[For]Asia]
Tuner Channel
System Coverage
PAL–BGH,
CCIR
SECAM–BG
Hong
PAL–I
Kong
PAL–DK,
OIRT
SECAM–DKK1
PAL–D China
[For]Australia]and]N.Z.]
Tuner Channel
System Coverage
PAL–B Australia
New
PAL–BG
Zealand
[For]Middle]East]
Tuner Channel
System Coverage
PAL–BGH,
CCIR
SECAM–BG
South
PAL–I
Africa
PAL–DK,
SECAM– OIRT
DKK1
RQT8906
66
§
or the Auto-Setup screen appears.
VHF UHF
E2–E12 E21–E69
— 21–69
44 MHz to
R1–R12 21–69
1–12 13–57
VHF UHF CATV
45 MHz to
0–12 28–69
470 MHz
44 MHz to
1–11 21–69
470 MHz
VHF UHF
S01–S05
M1–M10
E2–E12 E21–E69
U1–U10
S21–S41
4–13 21–69
44 MHz to
R1–R12 21–69
470 MHz

TV System

Change the setting to match the equipment you are connecting with,
or to match the title when there are both PAL and NTSC titles on the
HDD.
1
While stopped
Press [FUNCTION MENU].
2
Press [3, 4] to select "To Others"
and press [OK].
3
Press [3, 4] to select "Setup" and
press [OK].
4
Press [3, 4] to select "Connection"
and press [1].
5
Press [3, 4] to select "TV System"
and press [OK].
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
6
Press [3, 4] to select the TV system
and press [OK].
≥PAL (factory preset)
–Select when connecting to a PAL or Multi-system
television. Titles recorded using NTSC are played as PAL
60.
CATV
–Select to record television programmes and PAL input from
other equipment.
–[HDD] Select when playing a PAL input title recorded on the
S01–S05
HDD.
M1–M10
≥NTSC
U1–U10
–Select when connecting to a NTSC television. Television
S21–S41
programmes cannot be recorded properly.
–Select to record NTSC input from other equipment.
—
–[HDD] Select when playing a NTSC input title recorded on
the HDD.
7
Press [2, 1] to select "Yes" and
470 MHz
press [OK].
Z1–Z35
To return to the previous screen
Press [RETURN].
To exit the screen
Press [EXIT].
∫ To change the setting all at once (PAL
While stopped, keep pressing [∫] and [< OPEN/CLOSE] on the
main unit simultaneously for 5 or more seconds.
[Note]
≥This unit cannot record NTSC signals to discs that already have
PAL signal recordings. (However, both types of programmes can
CATV
be recorded onto the HDD.)
—
TV System
PAL
NTSC
SELECT
OK
RETURN
!# NTSC)