Timer Recording; Code - Panasonic Diga DMR-EH57 Operating Instructions Manual

Timer recording

e.g., [Australia]and]N.Z.]
Í DVD
DRIVE
SELECT
Numbered
buttons
3,4,2,1
OK
REC MODE
See also "Important notes for recording" (➡ 8).
Depending on the type of disc used for recording or the type of
broadcast, there may be restrictions on the title you are trying to
record.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
≥You can enter up to 32 programmes up to a month in advance.
(Each daily or weekly programme is counted as one programme.)
[RAM] [-RW‹V›] [+R] [+R]DL] [+RW]
≥To use a new disc, formatting is necessary.
Preparation
≥Turn on the television and select the appropriate video input to suit
the connections to this unit.
≥If recording to DVD, insert a disc that you can use for recording
(➡ 22).
≥Make sure that the clock settings are correct (➡ 67).
[For]Australia]and]N.Z.]
RQT8906
26
DVD
TV
Í
Í
VOL
CH
DRIVE
SELECT
AV
1 2 3
CH
4 5 6
INPUT SELECT
7 8 9
G-Code
DELETE 0
-/--
G-Code
SKIP SLOW/SEARCH
STOP PAUSE PLAY/x1.3
TIME SLIP EXIT
PROG/CHECK
OK
OPTION RETURN
CREATE
AUDIO DISPLAY CHAPTER MANUAL SKIP
REC REC MODE F Rec STATUS
G- is a registered trademark of

CODE

Gemstar Development Corporation. The
G- system is manufactured under
CODE
license from Gemstar Development
Corporation.
[For]Australia]and]N.Z.]
Using G- system to make timer
CODE
recordings
Entering G- numbers is an easy way of timer recording. You can
CODE
find these numbers in TV listings in newspapers and magazines.
1
Press [G-Code].
G-Code G-Code
Remain Remain HDD HDD 30:24 SP 30:24 SP DVD DVD
Record Record 12:53:00 15. 7. TUE 12:53:00 15. 7. TUE
Input G-Code Number 0-9, and press OK. Input G-Code Number 0-9, and press OK.
2
Press the numbered buttons to enter
the G- number.
CODE
Press [2] to move back to correct a digit.
3
Press [OK].
Timer
Remain HDD 30:24 SP DVD
Recording
12:54:00 15. 7. TUE
HDD
Name Date Start Stop Mode
DVD
1 ARD 15. 7. TUE 19:00 20:00 HDD SP
Programme Name
≥Confirm the programme (start and end time) by using a TV
magazine, etc. and make corrections if necessary using
[3, 4, 2, 1] (➡ 27, step 3).
≥When "-- ---" appears in the "Name" column, you cannot set
timer recording. Press [3, 4] to select desired programme
position. After you have entered the information of a TV
station, it is kept in the unit's memory.
4
Press [OK].
The timer programme is stored and the timer icon is
displayed.
Timer icon
"F" lights on the unit's display to indicate timer recording
standby has been activated.
12:56:00 15. 7. TUE
Drive
HDD
space
Stop Mode
DVD
20:00 HDD SP
Programme
Repeat steps 1–4 to programme other recordings.
Press [Í DVD] to turn the unit off.
∫ To cancel recording when recording has already
begun (➡ 28)
∫ To release the unit from recording standby
(➡ 28)
∫ Notes on timer recording (➡ 28)
1:58 SP 1:58 SP
1:58 SP
No. Name
&
01
ARD
OK Check to make sure "OK"
is displayed (➡ 29).