Using Flash - Sony DSC-HX90V Manual

Step:
Zooms in/out at certain angle steps when you operate the zoom by turning the control ring.
Note
In the following situations, the zoom function activates as if [Zoom Func. on Ring] is set to
[Standard], even if it is set to [Step].
When using the W/T (zoom) lever to change the zoom scale.
When recording movies.
When using zoom functions other than the optical zoom.
When the shooting mode is set to something other than [Intelligent Auto] or [Superior
Auto], assign the [Zoom] function to the control ring before using the control ring.
Selecting [Quick] increases the likelihood that the zoom sound will be recorded.
[43] How to Use

Using flash

In dark environments, use the flash to light up the subject while shooting and to prevent
camera-shake. When shooting against the sun, use the flash to lighten the image of the
backlit subject.
1. Press the (Flash pop-up) slide switch to pop up the flash.
2. Press the shutter button fully down.
When you do not use the flash
When not using the flash, press it back into the camera body.
Note
If you fire the flash before the flash unit pops up entirely, it may cause malfunction.
You cannot use the flash when recording movies.
While charging the flash,
Using shooting functions
flashes. After charging is completed, the flashing icon will
Using the flash