the proper charging procedure, check if the power of the product is turned off, then
remove the battery pack and re-insert the same battery pack securely, or disconnect and
reconnect the USB cable.
[242] Troubleshooting
The monitor does not turn on even when the product is
turned on.
[FINDER/MONITOR] has been set to [Viewfinder] and the Electronic Viewfinder is popped
up. Push down the Electronic Viewfinder or change [FINDER/MONITOR] to [Auto].
[243] Troubleshooting
You cannot record images.
You are using a memory card with a write-protect switch, and the switch is set to the
LOCK position. Set the switch to the record position.
Check the free capacity of the memory card.
You cannot record images while charging the flash.
The [Self-timer] is activated.
Set [Release w/o Card] to [Enable]. However, without a memory card inserted in the
camera, images cannot be recorded.
[244] Troubleshooting
Recording takes a long time.
The noise reduction function is processing an image. This is not a malfunction.
The [Auto HDR] function is processing an image.
The product is compiling images.
[245] Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Battery pack and power
Shooting still images/movies
Shooting still images/movies
Shooting still images/movies