Setting Up The Device - Fujitsu stylistic R726 Operating Manual

First-time setup of your device

Setting up the device

You can operate the device in an upright position on an even surface using the built-in tablet stand.
Make sure that the device is standing safe and securely and be careful that it does not
tip over. Otherwise the device may be damaged, particularly the touch screen.
Open the tablet stand to a maximum angle of 90 degrees. Otherwise
the joint of the tablet stand will be damaged.
► Open the tablet stand in the direction of the arrow to the desired opening angle.
► Set the device in its place.
20
90° max.
Fujitsu