HP A3100-8 v2 SI Configuration Manual page 123

Table 15 Required configurations on ports of different link types in order for the ports to support tagged
voice traffic
Port link type
Access
Trunk
Hybrid
IP phones send untagged voice traffic
•
When IP phones send untagged voice traffic, you can only configure the voice traffic receiving ports on
the device to operate in manual voice VLAN assignment mode.
Table 16 Required configurations on ports of different link types in order for the ports to support tagged
voice traffic
Port link type
Access
Trunk
Hybrid
NOTE:
• The PVID of a port is VLAN 1 by default. You can change the PVID and assign a port to certain VLANs
by using commands. For more information, see the chapter "VLAN configuration."
Use the display interface command to display the PVID of a port and the VLANs to which the port is
•
assigned.
Voice VLAN Support for
assignment tagged voice
mode traffic
Automatic
No
Manual
Automatic
Yes
Manual
Automatic
Yes
Manual
Voice VLAN Support for
assignment untagged voice
mode traffic
Automatic No
Manual Yes
Automatic No
Manual Yes
Automatic No
Manual Yes
Configuration requirements
—
Configure the PVID of the port, which cannot be
the voice VLAN, and assign the port to its PVID.
Make all the configurations required for the
automatic mode, and assign the port to the voice
VLAN.
Configure the PVID of the port, which cannot be
the voice VLAN, and configure the port to permit
packets of its PVID to pass through untagged.
Make all the configurations required for the
automatic mode, and configure the port to permit
packets of the voice VLAN to pass through
tagged.
Configuration requirements
—
Configure the PVID of the port as the voice VLAN.
—
Configure the PVID of the port as the voice VLAN
and assign the port to the voice VLAN.
—
Configure the PVID of the port as the voice VLAN
and configure the port to permit packets of the
voice VLAN to pass through untagged.
116