TP-Link Archer VR600v User Manual page 14

Chapter 2
2 Connect your computer to the modem router.
Method 1: Wired
Connect your computer's Ethernet port to a LAN port on the modem router via an
Ethernet cable.
Method 2: Wireless
Connect wirelessly by using the default SSID (Wireless Network Name) and Wireless
Password printed on the product label of the modem router.
Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, most USB
network cards, can be connected to your router through this method. (WPS is not
supported by iOS devices.)
Note:
The WPS function cannot be configured if the wireless function of the modem router is disabled. Also, the WPS
function will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is
configured with the appropriate encryption before configuring the WPS.
1 ) Tab the WPS icon on the device's screen.
2 ) Immediately press the WPS button on your modem router.
3 ) The Wireless LED
4 ) When the Wireless LED is on, the client device has successfully connected to
the modem router.
or flashes for about two minutes during the WPS process.
Connect the Hardware
9