Panasonic CQ-DX200W Operating Instructions Manual page 41

Problem
The number of auto
preset stations is
less than 6.
Preset stations
cannot be stored.
No playback or
disc ejected
Sound skipping or
noise
Sound skipping
due to vibration
Disc unejectable
Possible cause
The number of receivable stations is less than 6.
a Move to an area where receivable stations number is maximum, and try pre-
setting.
The contact of the battery lead is poor, or the battery lead is not always powered.
a Make sure that the battery lead is connected securely, and preset stations
again.
The disc is inserted upside down.
a Insert a disc correctly.
There is a flaw or foreign material on the disc.
a Remove the foreign material, or use a flawless disc.
There is a flaw or foreign material on the disc.
a Remove the foreign material, or use a flawless disc.
The unit is not sufficiently secured.
Secure the unit to the console box.
a
The unit is tilted at over 30˚ in the front-to-end direction.
a Make the angle 30˚ or less.
Something such as a peeled label obstructs the disc coming out.
Consult your dealer.
a
The microcontroller in the unit operates abnormally due to noise or other factors.
a Unplug the power cord and plug it again. In case the unit is still out of order,
consult your dealer.
Possible solution
a
CQ-DX200W
41