Panasonic CQ-DX200W Operating Instructions Manual page 43

Dvd player/receiver
Hide thumbs Also See for CQ-DX200W:
Table of Contents

Advertisement

Problem
Music is not played
back even if the
USB device is
connected.
"READING" is
displayed but
music is not played
back.
No playback or
disc ejected
Sound skipping or
noise
Sound skipping
due to vibration
Disc unejectable
The picture does
not appear on the
monitor.
The picture
appears
incorrectly.
Possible cause
The USB device and USB extension cable are not connected correctly.
a
Connect the USB device and USB extension cable correctly.
There is no music stored in a format that is supported on this unit.
a
Check if there is any music data that can be played stored on the USB device.
The file system of the USB device is not compatible with this unit.
Use a USB device with a FAT12/16/32 file system.
a
The current consumption of the USB device exceeds 500 mA.
a
Use a USB device with a current consumption lower than 500 mA.
A USB hub is connected.
a
Do not use a USB hub.
Too many recorded folders/files exist.
a
When there are too many recorded folders/files, it may take a long time to
read all of the files.
There is a flaw or foreign objects on the disc.
a
Remove the foreign objects, or use a flawless disc.
The disc has unplayable formatted data.
Refer to the description about available disc types.
a
There is a flaw or foreign objects on the disc.
a
Remove the foreign objects, or use a flawless disc.
The unit is not sufficiently secured.
a
Secure the unit to the console box.
The unit is tilted at over 30˚ in the front-to-end direction.
a
Make the angle 30˚ or less.
The microcontroller in the unit operates abnormally due to noise or other factors.
a
Unplug the power cord and plug it again. In case the unit is still out of order,
consult your dealer.
Cables are not correctly connected.
a
Connect cables correctly.
Stop the car and apply the parking brake.
a
The video signal setting of this unit (NTSC/PAL) does not match with the video
signal setting of the connected monitor.
Make the same setting between this unit and the monitor.
a
Possible solution
a
CQ-DX200W
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents