Dell S510 User Manual page 44

A
SPECT
image appears. Options are: Origin, 16:10, and 4:3.
•Origin — Select Origin to maintain the aspect ratio of the image
projector according to the input source.
•16:10 — The input source scales to fit the width of the screen to
project a 16:10 screen image.
•4:3 — The input source scales to fit the screen and projects a 4:3
image.
Z
OOM
3D F
ORMAT
Side, Side By Side Full, Top/Bottom, and Top/Bottom Full.
3D S
wearing DLP 3D goggles, you may need to execute 'Invert' to get
best match of left/right image sequence to get the correct image.
(For DLP 3D goggles)
44 Using Your Projector
Downloaded From projector-manual.com DELL Manuals
R —Allows you to select the aspect ratio to adjust how the
ATIO
—Press and
Z
OOM
Zoom Navigation menu.
Use
screen.
—Allows you to select the 3D format. Options are: Side By
I —If you see a discrete or overlapping image while
YNC NVERT
NOTE:
When you want to create a 3D experience, you will need a
1
few other components including:
"Active" 3D glasses with DLP Link™.
a
3D content. See "Note 2".
b
3D Player.
c
HDMI 1.4a 3D support and refresh rate are as below:
2
1280x720p@50 Hz Frame Packing
a
1280x720p@59.94/60 Hz Frame Packing
b
1920x1080p@23.98/24 Hz Frame Packing
c
1920x1080i@50 Hz Side by Side Half
d
1920x1080i@59.94/60 Hz Side by Side Half
e
1280x720p@50 Hz Top and Bottom
f
to zoom and view the image.
Adjust the image scale by pressing
and press
control only.
N —
Press
AVIGATION
to navigate the projection
to view on your remote
to activate the
or