Panasonic WV-BP550 Operating Instructions Manual page 24

2-2. ALC Mode with SUPER-D OFF and ELC Mode
Note: If ELC is selected, set MASK SET according to
this procedure.
1. Move the cursor to the SUPER-D parameter and
select OFF. (When you select ELC, SUPER-D is
not available.) The item MASK SET appears on the
menu.
** ALC CONT **
BACK LIGHT COMP
SUPER-D
MASK SET
LEVEL
RET END
2. Move the cursor to MASK SET and press
48 mask areas appear on the monitor screen. The
cursor is blinking in the top left corner of the
screen.
OFF
...I.....
- +
. The
-22-
Blinking
3. Move the cursor to the area where backlight is
bright and press to mask that area. The mask
turns white. (When the cursor is moved on an area
that has already been masked, the mask and cur-
sor start blinking.)
Blinking