Philips 42PFL3704D/F7 Service Manual page 26

Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
[4] Rear Cabinet
[1] Stand Base Assembly
(5) Refer to the following "Reference Notes in the
(S-4)
4-14
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
Table."
(S-4)
(S-4)
(S-2)
[2] Stand Hinge
[3] Stand Sub Cover
(S-3)
(S-1)
(S-6)
(S-4)
(S-7)
(S-5)
Fig. D1
A91H9DC