Panasonic LUMIX DMC-GF1K Operating Instructions Manual page 81

¢ When the [ISO LIMIT SET] of [REC] mode menu (P121) is set to anything except [OFF],
it is set automatically within the value set in [ISO LIMIT SET].
It is set as following when the [ISO LIMIT SET] is set to [OFF].
• When [AUTO] is selected, ISO sensitivity is adjusted automatically depending on
brightness within a maximum setting of [ISO400].
• When setting to [
within the maximum setting of [ISO800]. ([ISO400] when the flash is used)
• The ISO sensitivity will be set to [AUTO] when recording motion pictures. Also, the
[ISO LIMIT SET] will not operate.
∫ About [ ] (Intelligent ISO sensitivity control)
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimise the jitter of the subject.
• The shutter speed is not fixed when the shutter button is pressed halfway. It is continuously
changing to match the movement of the subject until the shutter button is pressed fully. Confirm
the actual shutter speed on the information display for the picture being played back.
Note
• The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
• Refer to P62 for the flash range.
• Depending on the brightness and how fast the subject is moving, jitter may not be avoided even
if [ ] is selected.
• Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
• The setting is fixed to [
– In [SPORTS],[BABY1]/[BABY2] and [PET] in Scene Mode
• Programme Shift cannot be activated when the ISO sensitivity is set to [
• You cannot select [
cannot select [AUTO] in Manual Exposure Mode.
• To avoid picture noise, we recommend reducing the ISO sensitivity, setting [NOISE
REDUCTION] in [FILM MODE] towards [_] or setting the items except [NOISE REDUCTION]
towards [`] to take pictures. (P83)
• The camera will not be able to operate with 3/4/2/1 if the [DIRECT AF AREA] (P128) is set
to [ON]. Set using the Quick Menu (P30).
], ISO sensitivity will adjust automatically depending on brightness
] in the following cases.
] in Shutter-Priority AE Mode and Manual Exposure Mode. Also, you
Advanced (Recording pictures)
].
VQT2G62
81