Panasonic LUMIX DMC-GF1K Operating Instructions Manual page 33

[MONITOR]/
[VIEWFINDER]
• Adjust the brightness of the screen with 3/4, contrast and saturation
with 2/1 or the rear dial.
• When [DISPLAY] is pressed in screen shown right, it will switch to the
colour adjustment screen. Adjust between red and green with 3/4, or
between orange and blue with 2/1 or the rear dial.
Press [MENU/SET] to return to the LCD adjustment screen.
• It will adjust the LCD monitor when the LCD monitor is in use, and the
viewfinder when optional external viewfinder is in use.
[LCD MODE]
LCD
• The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear differently from actuality on the LCD monitor. However, this does not affect the
recorded pictures.
• The LCD monitor automatically returns to normal brightness after 30 seconds when recording
in Power LCD mode. Press any button to make the LCD monitor bright again.
• If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or
another object to block the light.
• The number of recordable pictures decreases in Auto Power LCD and Power LCD modes.
• [AUTO POWER LCD] cannot be selected when playing back pictures.
• [AUTO POWER LCD] is disabled during motion picture recording.
• When the menu screen is displayed in a dark environment etc., the LCD monitor becomes
darker even if [LCD MODE] is set to [OFF].
} [SCENE MENU]
[BEEP]
u [VOLUME]
• When you connect the camera to a TV, the volume of the TV speakers does not change.
Brightness, colour, or red or blue tint of the LCD monitor/optional
external viewfinder is adjusted.
These menu settings make it easier to see the LCD monitor when
you are in bright places.
[OFF]
„ [AUTO POWER LCD]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
... [POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
Set the screen that is displayed when the mode dial is set to
[OFF]: The recording screen in the currently selected scene
mode appears.
[AUTO]: The scene mode menu screen appears.
Set the focus confirmation beep, the self-timer beep and the
alarm beep.
[s] (Muted)
[t] (Low)
[u] (High)
Adjust the volume of the speaker to any of 7 levels.
Preparation
.
33
VQT2G62