[Snow]; [High Sens.] - Panasonic Lumix DMC-FZ50 Operating Instructions Manual

• If you do not want the age to be displayed,
select [WITHOUT AGE] and press
[MENU/SET].
1
3
9 10
months days
10:00 1.DEC.2006
∫ Birthday setting
1 Press 3/4 to select [BIRTHDAY SET.]
and then press [MENU/SET].
2 When the message [PLEASE SET THE
BIRTHDAY OF THE BABY] appears,
select items (Year/Month/Day) using
2/1 and set them using 3/4.
3 Press [MENU/SET] to finish the setting.
• If you select [WITH AGE] without setting
the birthday in advance, a message is
displayed. Press [MENU/SET] and set the
birthday in steps 2 and 3.
• The focus range is 5 cm (Wide)/2 m (Tele)
to ¶.
• The ISO sensitivity is fixed to [
• The auto bracket setting is disabled.
• After turning on the camera in [BABY1]/
[BABY2] in scene mode or switching to
[BABY1]/[BABY2] from other scene
modes, the age and current date and time
are displayed for about 5 seconds at the
bottom of the screen.
• The age display style differs depending on
the language setting in the recording
mode.
• The display style when printing may differ
slightly from the display style on the
screen.
• The date of birth is displayed as
[0 month 0 day].
• If the age is not properly displayed, check
the clock and birthday settings.
• If the camera is set to [WITHOUT AGE],
the age is not recorded even if the time
and birthday are set. This means the age
1
BABY1
WITH AGE
WITHOUT AGE
BIRTHDAY SET.
CANCEL SELECT SET MENU
].
cannot be displayed even if camera is set
to [WITH AGE] after taking the pictures.
• Use [RESET] in the [SETUP] menu to
reset the birthday setting. (P29)

[SNOW]

Press [ MENU ] to display the [SCENE MODE]
SET
menu and select a scene mode. (P63)
This mode will adjust the white balance and
the exposure to show the snow as white as
possible.

[HIGH SENS.]

Press [ MENU ] to display the [SCENE MODE]
SET
menu and select a scene mode. (P63)
Select this mode for high-sensitivity
processing. You can take pictures at ISO
3200 sensitivity.
• The resolution of the recorded picture
decreases slightly because of high
sensitivity processing. This is not a
malfunction.
• The focus range is 5 cm (Wide)/2 m (Tele)
to ¶.
• You can take pictures suitable for 4qk6q/
10k15 cm printing.
• The flash setting is fixed to Forced OFF
[ ].
• The quality cannot be set to [RAW].
• The extra optical zoom and digital zoom
cannot be used.
Advanced
3
3
69
VQT0Y16