Geometry Menu - Picture Position And Sharpness - Fujitsu Siemens Computers MYRICA V27-1 Operating Manual

GEOMETRY menu - picture position and sharpness

These settings are only available when you use the LCD TV as a monitor for your PC
(SOURCE=PC).
A26361-K1037-Z120-1-M119, edition 1
Downloaded From TV-Manual.com Manuals
LCD TV MYRICA V27-1 / V32-1
AUTO (automatic setting)
With this function you set the picture settings automatically.
CLOCK
With this function you set the fine tuning of the VGA
alignment for a stable VGA display.
Possible values: 0 -100
PHASE
With this function you set the focus and the sharpness of
the VGA display.
Possible values: 0 -100
H-POSITION (horizontal position)
With this function you move the picture to the left or to the
right.
Possible values: 0 -100
V-POSITION (vertical position)
With this function you move the picture up or down.
Possible values: 0 -100
RECALL
With this function you reset all parameters of this menu to
the factory settings.
English - 25