Making Calls - Gigaset Maxwell Basic Manual

Making calls

The phone is connected to the LAN.
At least one VoIP connection has been set up and assigned to the telephone.
VoIP connections are set up by the administrator with the Web configurator or
assigned using a PABX.
Up to four VoIP connections (call numbers) can be assigned to the telephone. The first
connection to be set up is the standard send connection. The name of the standard
send connection is displayed in idle status at the top left of the display header
( p. 7).
No connection available: the following icon is shown in the display
Information about the telephone connections and the standard send connection:
Web configurator
Making a call
¤
. . . use to enter a number
or
¤
lift the handset
Calls are initiated via the standard send connection if you do not select another option. To use
another VoIP connection:
¤
Select Line . . . use
number Dial
Using the speaker to make calls:
Using the headset to make calls:
You can switch over at any time during the conversation.
In the following instructions, the icon
When entering the call number:
Deleting incorrectly entered numbers to the left of the cursor:
Transferring a number to the local directory:
Cancel dialling:
Incoming call during number entry:
Accept the call:
Reject the call:
p. 40
lift the handset
. . . use to enter a number
to select required connection
¤
¤
¤
End
¤
Accept
¤
Reject
Dial
Dial
Press the Handsfree key
Press the Headset key
also always stands for
¤
¤
Making calls
. . . use to enter the
or
( p. 23)
.
11