Parental Password - Philips DVD727 Owner's Manual

Digital video disc player
Hide thumbs Also See for DVD727:
Table of Contents

Advertisement

28 Parental Password

DVD
The PARENTAL feature limits viewing of DVDs. You need a password to
change the PARENTAL settings or to play Locked Discs.To set your
password, follow the steps below.
To adjust the PARENTAL level so DVDs cannot play if they exceed that
level, see page 30.
To prevent specific DVDs from playing, regardless of how you set the
PARENTAL level, see page 29.
1
Press SYSTEM MENU.
2
Press 2 to select the PASSWORD SETUP PAGE
icon at the top of the menu, then press OK or 4.
PASSWORD will be highlighted in green.
3
Press 2 to highlight CHANGE in green, then press OK.
4
A box beside OLD PASSWORD will be highlighted.
Press the Number buttons to enter your old six-digit
password in the OLD PASSWORD box. (If this is the first time
you have set a password, you do not have to enter an OLD
PASSWORD.The numbers you enter will go into the NEW
PASSWORD box automatically instead.) Next, press the Number
buttons to enter a new six-digit password of your choice in
the NEW PASSWORD box. Then, press the Number
buttons to enter the same new six-digit password in the
CONFIRM PWD box.
5
Press OK to save the new password. The previous menu will
appear.
6
Press SYSTEM MENU to remove the menus.
Downloaded From Disc-Player.com Philips Manuals
4
2-3,5
• The default or factory preset
• Philips denies any liability
• Your password must have
• If you make a mistake or can
1,6
Helpful Hints
password is 842100. You can
use it to play a Locked Disc or
enter it as the old password.
The 842100 password is
acceptable even after you set
your own personal password.
associated with unintended
watching of Discs. Make sure
your Discs play according to your
PARENTAL settings before you
allow children access to the
Player.
exactly six digits. A series of *s
will appear instead of your
actual password to protect the
password's identity.
not remember the new
password when you get to the
CONFIRM PWD box, press
SYSTEM MENU to quit.Then,
start again at step 1.

Advertisement

Table of Contents
loading

Table of Contents