Example Of Connection Via Vlans - D-Link DIR-620 Quick Installation Manual

DIR-620

Example of Connection via VLANs

If your ISP provides:
access to the Internet via the VLAN with the tag (VLAN ID) 2, the
•
PPPoE
user_password,
access to IPTV service via the VLAN with the tag (VLAN ID) 10,
•
access to IP telephony via the VLAN with the tag (VLAN ID) 20,
•
and your set-top box is connected to the LAN port 3, your VoIP phone is
connected to the LAN port 4 of the router, then follow the next steps to
configure the router.
1. Go to the Net / WAN page, select the WAN connection and click the
Delete button on the opened page.
2. Go to the Advanced / VLAN page.
3. Select the lan group.
4. Deselect the port3 checkbox.
5. Deselect the port4 checkbox.
6. Click the Save button.
7. Select the wan group and click the Delete button.
8. Click the Add button.
9. In the Name field, enter a name for the group (INTERNET).
10. From the Type drop-down list, select the Tagged NAT value.
11. From the
(corresponds to the INTERNET port of the router).
12. In the VLAN ID field, enter 2.
13. Click the Save button.
You have created the group of ports for connection to the Internet.
connection type,
Tagged port
the login
drop-down list, select the value
Quick Installation Guide
user, and the password
internet
33