Table of Contents
Advertisement
• Refer to P66 for the available range of the
aperture value and the shutter speed.
• The brightness of the screen may differ
from that of the actual pictures. Check it
using review function or setting to the
playback mode.
• You cannot set the following items in
Shutter-priority AE.
– Slow sync./Red-eye reduction [
(P48)
– [AUTO] in ISO sensitivity (P81) (When
the recording mode is switched to
Shutter-priority AE, the ISO sensitivity is
automatically set to [ISO100] even
though it was set to [AUTO] beforehand.
You can also change ISO setting from
[ISO80], [ISO200] or [ISO400] on the
menu.)
• When the exposure is not adequate, the
aperture value and the shutter speed on
the screen turn red.
• When the shutter speed is slow, we
recommend using a tripod.
64
VQT0S12
Recording pictures (advanced)
Manual exposure
Decide on an exposure by setting the
aperture value and the shutter speed
manually.
1 Set the aperture value and the
shutter speed.
]
•
: Aperture value
•
: Shutter speed
2 Press the shutter button halfway.
• Indication for the condition of exposure
A (manual exposure assistance)
appears for about 10 seconds.
• When the exposure is not adequate, set
the aperture value and the shutter
speed again.
5
F2.8
1/30
F4.0
1/125
Advertisement
Table of Contents
