Table of Contents
Advertisement
Connecting to a PictBridge-compliant Printer
By connecting the camera directly to a
printer supporting PictBridge via the USB
connection cable (supplied), you can select
the pictures to be printed or start printing
on the LCD monitor.
Set the print settings such as print quality
on the printer beforehand. (Read the printer
operating instructions.)
REMOTE
AV OUT/
DIGITAL
DC IN 8.4V
A: USB connection cable (supplied)
B: AC adaptor (DMW-CAC1; optional)
• Turn off the camera before inserting or
removing the cable for the AC adaptor
(DMW-CAC1; optional).
1 Turn the camera on and then set
[USB MODE] on the [SETUP]
menu to [PictBridge (PTP)].
(P114)
118
VQT0S12
Connecting to a PC or Printer
2 Turn on the printer.
3 Connect the camera to a printer
via the USB connection cable A
(supplied).
• Connect the USB connection cable with
the [
the [DIGITAL] socket.
• Hold the USB connection cable at C
and insert straight in and take straight
out.
When the DPOF
Print is not set.
When the DPOF
Print is set.
(P103)
• Disconnect the USB connection cable
after printing.
• It may take time to print some pictures.
Therefore, use a battery with sufficient
battery power (P12) or the AC adaptor
(DMW-CAC1; optional) when you connect
to a printer.
• If the remaining battery power becomes
low during communication, the power
indicator blinks and the alarm beeps. In
this case, stop the communication at
once.
• Do not use any other USB connection
cables except the supplied one.
• For printing the age in [BABY] (P72) in the
scene mode, print from a PC using the
software [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied). For details, refer to
the separate operating instructions for PC
connection.
] mark facing the [1] mark on
Select [SINGLE
PICTURE]. (P119)
Select [DPOF
PICTURE]. (P120)
Advertisement
Table of Contents
